waste rubber/plastic to fuel machine

1waste rubber/plastic to fuel machine 2High oil output 3the patent technology 4Carbon black &oil extracting from waste

                              waste rubber/plastic to fuel machine

Overview of pyrolysis plant

The whole pyrolysis system is composed by 13 parts, which are reactor ,transmission device, catalytic chamber, cooling tube, heavy tank ,oil-water separator,condenser,light oil tank, safety device, vacuum system,dedusting system, draft fan,chimmey.

Cooling systems decides oil output. There are two steps for cooling. Cooling pipe is the first step. The second is condenser. We have three condensers. And there are 57 pipes in one condenser. Diameter is 48mm for one small pipe. The heat exchanging area is about 13square meters for one condenser. So the total cooling area is about 40 square meters, which will guarantee you a high oil yield.

Advantages of waste tire recycling oil pyrolysis plant:

1. The ability to recover valuable product and/or energy from wastes

2. The process is "greener with high technology solutions

3. The ability to reduce and eliminate deposal of scrap tires in landfills.

4. Helps to meet the country’s recycling philosophy and targets.

5. Reduces greenhouse gas production - helps meet Kyoto Protocol targets.

 The main composed Parts and the advantages:

  (1)Feeding-in system:

     The raw material can be waste tyres, rubbers or plastic. If your raw material is plastic, we suggest that you use the auto feeder. If your raw material is waste tires, we suggest that you use belt conveyor.

  (2)Pyrolysis system:

The reasonable thickness, it is easy to heat and easy to be cool down.

  (3)Heating system:

There are various kinds of fuel, such wood, charcoal, coal, LPG etc.

  (4)Deducting system:

They usually have one or two equipments for deducting, we the three, desulfurization scrubber, water film cyclon and the advanced bag dedusting.

  (5)Impurities removing system:

There are two devices for removing the impurities from the oil gas, one is gas separate tank, the other is depositing tank.

  (6) Cooling system:

 We have the new design for the cooling system; it has better cooling effect and high oil yield.

  (7)Oil Store system: For store the oil.

  (8)Waste gas recycling system:

It is also named water seal, it has two effects, and one is for one is gas separate tank, the other is depositing tank.

 (9)Carbon black discharging system:

   The carbon black is coming out automatic; there also has a screw conveyor for removing the carbon black.

 

Safety

1. With an auto welding machine for the reactor, it can not only greatly improve working efficiency but also guarantee the quality of welding seam, thus avoid explosion caused by gas leak. Professional heating treatment and x-ray detection chamber are especially for welding.

 2. Vacuum system will prevent oil gas from going back to reactor and causing accident.

 3. Professional thermometer, pressure gauge and safety valve.

 4. It is dangerous to burn exhaust gas (C1 to C4) without any safety measures. In our process, it is transferred first through the safety device and a safety burning air muzzle. Before burning, we should ensure the safety of production.

 Long service life

 1. Material: Q245R special steel plate, thickness 14-16mm

 2. Welding: Automatic welding machine with heating treatment and x-ray detection will prolong the service life of reactor to the max.

 3. The service life of the reactor will be 10 years

  Energy saving:

 1. Well sealing for heating system, no gas leak and saving fuel.

 2. The exhaust gas will be recycled for reactor heating.  

 Oil yield rate of different raw materials:

 The technical parameter for waste plastic

The whole equipment

            Thanks for your browsing!  Welcome your inquire!

waste rubber/plastic to fuel machine